GoodWe ESA: reconnect to WiFi
Your battery keeps running while it is offline, you just lose the app. The ESA needs a 2.4 GHz WiFi network, it can't use 5 GHz.
Rather watch? Jump to the video
In the SEMS+ app
- Stand near the unit with Bluetooth on. In SEMS+, tap Service, then Local Access.
- On the Bluetooth tab, tap Search Device and pick the one starting WLA-. If it isn't listed, double click the Reload button on the WiFi stick. That turns Bluetooth on for 5 minutes.
- Log in. The first time, the password is 1234 and the app asks you to change it.
- Tap the communication card, then Settings, then WLAN. Pick your network and type the password.
- Watch the light on the stick. Steady means connected. Two blinks means it hasn't reached the router. Four blinks means it reached the router but not the internet.
Set up the GoodWe WiFi stick
Video by GoodWe
GoodWe's video is for the same WiFi stick, but it shows the older SolarGo app, so your screens will look different. The steps here are for SEMS+.
Still stuck?
Call the team on 1300 3458 00. If you can smell burning, or see damage or water on the system, don't touch it, call us.