GoodWe ESA: time of use settings
Set when the battery charges from the grid and when it discharges, in the SEMS+ app.
Rather watch? Jump to the video
In the SEMS+ app
- Open Devices and tap your inverter. Under Common Controls, tap More Control.
- Tap Energy Management, then Working Mode, then the hexagon under TOU.
- Tap + and choose Charge or Discharge. Set the start time, end time, months and days.
- Set the Charge Cut-off SOC or Discharge Cut-off SOC. 100 charges to full, 40 stops discharging at 40%.
- Set the power as a percentage of the inverter. 100 is full rate, 20 on a 10 kW inverter is 2 kW.
- Tap the tick to save. Go back to Working Mode and check TOU is switched ON.
Not sure what your plan's cheap hours are? The Energy Plan Finder reads your bill and shows them.
Set up Time of Use in the SEMS+ app
Video by GoodWe
Still stuck?
Call the team on 1300 3458 00. If you can smell burning, or see damage or water on the system, don't touch it, call us.