Victron: reconnect to WiFi
Your power keeps running while the Cerbo is offline, you just lose VRM on your phone. The Cerbo's built in WiFi needs a 2.4 GHz network.
Rather watch? Jump to the video
On the GX Touch screen
- Go to Settings, then Connectivity, then WiFi.
- Pick your network and type the password.
- If an Ethernet cable is plugged in, the Cerbo uses that first.
No screen? Use your phone
- Stand within a few metres of the Cerbo. Scan the QR code on its side, or join the network named Venus- and its serial number. The key is on the side of the box and on a card that came with it.
- Open the VictronConnect app and pick the Cerbo, then Remote Console. Or go to http://172.24.24.1 in a browser.
- Follow the same WiFi steps as above.
Connect a Victron GX device to the internet
Video by Victron Energy
Victron's video is older and shows other GX models, but the WiFi steps are the same. WiFi starts at about 1:06.
Still stuck?
Call the team on 1300 3458 00. If you can smell burning, or see damage or water on the system, don't touch it, call us.